An MJ model code lists the gear unit, structure, size, motor and mounting details in a fixed order. Fields marked as omitted are left out when the standard specification applies.
Example codes
MJ F 79 MD 39-Y 0.55-4P-180°-1-AM1-485-M1-A-ACW
Gear unit with motor.
MJ F 79 MD 39-AD1-485-M1-A-ACW
Gear unit with input shaft (input shaft model AD1).
Fields in order
Page numbers (P…) in the table refer to the MJ catalog PDF.
| Field | In the example | Values |
|---|---|---|
| Gear unit type | MJ | MJ = spiral bevel gear hard tooth surface speed reducer |
| Structure | F | see structure codes; ordinary shaft extension foot installation is omitted |
| Type (size) | 79 | see model selection parameter form on P107-P137 |
| Combined speed reducer (omitted for single machine) | MD | see model selection parameter form on P107-P134 |
| Model of combined speed reducer (omitted for single machine) | 39 | see model selection parameter form on P107-P134 |
| Motor type | Y | see motor type codes |
| Motor power | 0.55 | see model selection parameter form on P107-P134 |
| Motor pole | 4P | see model selection parameter form on P107-P134 |
| Angle of wiring box | 180° | if there is no indication, the default angle of wiring box is 0°; see installation form figure on P103-P106 |
| Wire inlet position (default position X omitted) | 1 | if there is no indication, wire inlet position X; see installation form figure on P103-P106 |
| Coupling flange (omitted if it is standard specification) | AM1 | AM1 rigid connection; AM flexible coupler (contact the technical department for size details) |
| Ratio | 485 | see model selection parameter form on P107-P137 |
| Mounting position | M1 | M1, M2, M3, M4, M5, M6; if there is no indication, supplied as M1; see P103-P106 |
| Output shaft, expansion plate output end or flange direction | A | A, B, A+B; if there is no indication, supplied as direction A; see P103-P106; position of the expansion plate output end on P008 |
| Design of shaft (omitted if it is standard specification) | ACW | ACW; omitted if it is standard specification; see P099 |
| Input shaft model | AD1 | see model selection parameter form on P135-P137 |
Structure codes
| Structure | Code |
|---|---|
| Ordinary shaft extension foot installation | (omitted) |
| Foot and hollow shaft installation | AB |
| B5 flange installation | F |
| B5 flange and hollow shaft installation | AF |
| Hollow shaft installation | A |
| Hollow shaft installation with reverse rotary arm fixation | AT |
| B14 flange and hollow shaft installation | AZ |
| Expansion plate installation | H |
| Foot and expansion plate installation | HB |
| B5 flange and expansion plate installation | HF |
| B14 flange and expansion plate installation | HZ |
| Expansion plate installation with reverse rotary arm fixation | HT |
- If there is no indication, the product is supplied according to ordinary shaft extension foot installation.
Motor type codes
| Motor type | Code |
|---|---|
| Ordinary motor | Y |
| Flameproof motor | YB |
| Direct current motor | Z |
| Brake motor | YEJ |
| Multi-speed motor | YD |
| Variable frequency motor | YVP |
| Metallurgy hoisting motor | YZ |
| Transduction braking motor | YVPEJ |
| Roll motor | YG |
Source: TANHON MJ series catalog (2024), p. 097-098. Download the MJ catalog (PDF)
More MJ series documentation
Need help sizing an MJ unit?
Send your load, speed and duty data and our engineers will reply with a model code.
Contact an Engineer